Wednesday, July 14, 2021

Fixing MHN33 Washers: SUDS of Need to Spin Clothes Out

Print this out as a guide for yourself or cleaners if you run into this situation so you can resolve issues for customers right away.
Ev
A Heck of A Nice Guy

Maytag MHN33 Front Load Washers: What to do in case of:

ZERO MINUTES or SUDS on screen and lots of water or soap in machine or SPIN OUT clothes for customer

1. look on the screen
2. if it says "zero minutes" then machine was unbalanced either by too much clothes or something stuck to the inside of the tub
“Suds” means TOO MUCH SOAP was used
3. no refund because directions weren't followed for proper usage
4. open door
5. redistribute clothes inside washer or spread out amongst multiple washers
6. open access panel on top


 
7. press down  white button twice (don't hold button down) screen flashes random numbers





8.  hold “Delicates” button on the front panel until entire display reads “P-01”



9. press “extra rinse” button on front panel until “P-06” appears on screen.




10. close door



11. Push start button

Door locks washer spins for 5 minutes. Clothes should be spun out. Explain clothes did get washed just too much soap or unbalanced load to spin out
12. spin clothes again if needed
13. look in soap drawer and scrape out all leftover soap
14. Replace top access panel

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.