Access Maytag/Primus MXR65 Coin Drop

 

Getting new equipment can be exciting and a little intimidating as you move from something familiar to something unknown. Sometimes we get brain lock when it comes to figuring out how to do some of the simple tasks on the new equipment.

For people upgrading to Maytag/Primus MXR65 washers here is how to open the panel to get at the coin slide:

Use the silver triangle shaped key you received to open the lock on the left top front. If you have two keys you can open the right top lock at the same time. If you only have one key then you have to unlock one side, pry the top lid up slightly so you can set the lock to lock and you can remove the key to put it in the right side lock. Use the prop rod to keep the lid up.

Remove the two T20 screws at the top of the panel that are facing you. That will unlock the panel. 

Remember the older MFR line that you had to remove the soap dispenser screws then unlock the lid? No more!

Just remove the two screws described above.

Grab the panel at both ends and lift slightly and tilt forward. There is a notch at both sides that you can latch the 

control panel in so you don't have to remove it completely and it will stay in place.

Coin slide is on the top left. Be careful taking off the top clip of the coin slide if you need to take it apart.

It is easy to lose the slide inside the machine!

To close up reverse the process.

Ev

A Heck of A Nice Guy