Fixing Maytag MHN30 Common Errors

Maytag MHN30 Front Load Washers:

What to do in case of:
ZERO MINUTES or SUDS on screen and lots of water or soap in machine

1. look on the screen
2. if it says "zero minutes" then machine was unbalanced either by too much clothes or something stuck to the inside of the tub
“Suds” means TOO MUCH SOAP was used
3. both are usually customer error so up to you about refunds
4. open door
5. redistribute clothes inside washer or spread out amongst multiple washers
6. open access panel on top

7. press down  white button twice (don't hold button down) screen flashes random numbers

8.  hold down right button on bottom row of the front panel until entire display flashes

9. press middle button in top row on front panel

10. close door

Door locks washer spins for 5 minutes.
Clothes should be spun out.
Explain clothes did get washed just too much soap or unbalanced load to spin out
11. spin clothes again if needed
12. look in soap drawer and scrape out all leftover soap

Maytag Washer MHN30 OUT OF ORDER,
 F29, F22, F28 or other "F numbers"

1. look on the screen 
2. have customer switch washers if beginning to wash or spin out if ending
3. open door (there may or may not be water inside)
4. open access panel on top

 

 5. press down  white button twice (don't hold button down) screen flashes random numbers

6.  hold down right button on bottom row of the front panel until entire display flashes

7. press center button in bottom row on front panel.
Door locks and washer does 10 minute test cycle

 8. If “F Number” returns after test period then there is an issue. Check service manual for codes and how to fix it.

 Ev
A Heck of A Nice Guy