Wascomat Crossover Error Reset Shortcut

 

Do you ever have washers lock up with clothes inside? Sometimes pulling the plug and waiting five minutes before plugging the washer back in will work, sometimes it doesn't.

If you have Wascomat Crossover washers in your laundry room or laundromat and need to get the door open to get items out, here is an easy way.

Ev

A Heck of A Nice Guy

Error 1, Error 2, or other numbers and door locked NO water in machine

1. Press and HOLD the Cold, Delicate, and Start buttons for 3 seconds. The display shows "0000" and the LEDs blink above the program buttons

2. Using the Cold, Warm, Hot and Delicate buttons, set the display to read "1234" (Cold changes the thousand value, warm the 100’s value, etc)

3. Press the Start button. If there is not a physical malfunction of the door lock, the door will unlock within 5 minutes

Error 1, Error 2, or other numbers and door locked with water INSIDE machine

1. Press and HOLD the Cold, Delicate, and Start buttons for 3 seconds. The display shows "0000" and the LEDs blink above the program buttons

2. Using the Cold, Warm, Hot and Delicate buttons, set the display to read "1234" (Cold changes the thousand value, warm the 100’s value, etc)

3. Press the Start button. The door will not unlock because of the water in the washer

4. The display shows "10"

5. Use the Heavy Soil and Extra Rinse buttons to change display to “46”

6. Press the start button and pump will turn on. Water should start to drain out

7. Push start button again when water is drained out to turn pump off

8. Repeat step 5 to return display to “10” if door doesn’t unlock when pump is turned off

9. Press the Start button. If there is not a physical malfunction of the door lock, the door will unlock within 15 minutes