Turn Off Eco Settings on Huebsch & Speed Queen Top Load Washers

 

Have you ever seen people start up a washer and let the water run for a minute or two and then open the lid and put their clothes in the washer while being bathed in the steam?
A lot of customers like seeing how hot the water is for their wash.
For Huebsch and Speed Queen top load washers there is a setting that saves hot water expenses for the owner.

If the customer selects a hot cycle the hot water will turn on for only a few seconds before shutting off and the tub continues to fill with cold or lukewarm water.
This is supposed to save the owner money. It can, however if you have customers that open up the lid like described above, they might complain that their water isn't hot enough.

If you want to turn off this setting and have a regular fill of hot water here is how you do it:

For older versions of Quantum and Galaxy software washers:
1. enter service mode, 
2. when "RAPID" appears on the screen, arrow down to PROGRAM
3. hit start button
4. Arrow down to CYCP
5. hit start
6. there will be a number appearing usually 14
7. hit start
8. arrow down to 0 
9, hit start
10. press back button till regular price appears

For newer versions watch the video (this also shows much of the above steps for older models):

Turn Off Hot Water Saver Huebsch & Speed Queen Top Loaders

Ev
A Heck of A Nice Guy